Free Shipping

AeroCool Touch 2100 LCD Fan Controller with USB3.0, Audio/Mic

MPN: EN51965 | SKU: DY4383
Regular Price: $65.50
Price: $55.88
In Stock. FREE Shipping!
  • Controls and monitors five sets of fan speeds and temperatures
  • Touch Control LCD display
  • 2 x USB3.0 and Audio and Mic Port
$65.50
$55.88
You save 15% today!
In Stock. FREE Shipping!
Upgrade Your Warranty:

Frequently Bought With

  • Key Selling Points

Key Selling Points

  • Controls and monitors five sets of fan speeds and temperatures
  • Touch Control LCD display
  • 2 x USB3.0 and Audio and Mic Port
  • Description
  • Product Details
  • Customer Reviews
  • Q&A

Description

This AeroCool Touch-2100 5-Channel Fan Controller fits dual 5.25" drive bays and monitors up to five temperature sources, and can control up to five fans to let you keep your case and components as cool as possible! The faceplate includes two USB 3.0 ports and 3.5mm Audio I/O ports to increase your front panel functionality! Choose the color of your display from eight different colors, and switch between Celsius and Fahrenheit for your temperature display!

Material
Aluminum
LCD Display Dimensions
Max Monitored Temps
5
Max Controlled Fans
5
Safeguards
Overheating Alarm
Temperature Measurements
Celsius
Fahrenheit
Front Panel I/O
2 x USB 3.0
3.5mm Audio In
3.5mm Audio Out
Overheat Alarm
When a temperature exceeds the alarm temperature, the Touch-2100 will increase the fan speed to maximum until the temperature is brought below the alarm temperature.
Controls Up To 5 Fans
Touchscreen display allows control of up to 5 fans right at your fingertips!
Material
Aluminum
LCD Display Dimensions
Max Monitored Temps
5
Max Controlled Fans
5
Safeguards
Overheating Alarm
Temperature Measurements
Celsius
Fahrenheit
Front Panel I/O
2 x USB 3.0
3.5mm Audio In
3.5mm Audio Out
# Heat Sensors
5
Drive Bays Needed
2 x 5.25" Drive Bays
Cable Connectoins
2 x USB 3.0
2 x USB 2.0
5 x Fan 3-pin
1 x 4-pin Molex
Max Wattage/Fan
25W
  • Aluminum

PACKAGE INCLUDES:

  • 1 x AeroCool Touch-2100 Dual-Bay 5-Ch Fan Controller w/ LCD Touch Screen


Brand: AeroCool

MPN: EN51965

UPC: 841269043137

Compatibility: Dual 5.25" Drive bays, 4-pin Molex, 3-pin fan connection, USB 3.0, USB 2.0

Packaging: Retail

Condition: New



Product Details

Manufacturer
AeroCool
MPN
Touch 2100
Compatibility
2 x 5.25" Bay
Types
Touch Screen Fan Controller
Material
Aluminum
Dimensions
150 x 85 x 70mm
Features
Innovative "Touch" LCD technology.

Support up to maximum 25W per fan channel.

7 LCD backlight colors selection or turn off backlight completely.

Monitors and Controls 5 sets of temperature and fan speed individually.

Switch between Celsius and Fahrenheit.

Overheating alarm temperature warming.

Fan working display.

2 x USB3.0, Mic & Headphone.
Package Includes
Fan Controller; Manual; Screws

Package Includes

Customer Reviews

Review Summary
4.5
Reviews
5
57.14% (12)
4
23.81% (5)
3
9.52% (2)
2
4.76% (1)
1
4.76% (1)
By Jacob Taylor
I love this
I looked over a milliion fan controllers it seems. I run a total of 10 fans in my case, and wanted to avoid some common problems associated with the eye candy it provides. I have this hooked up to 6 of my fans, one set is a single cooler unit, and it is solid. I have seen any major issues with its ability to power the fans at all, and definately has the beef to do it. The tape for the temp sensors is poor, and i recommend another method for this. The look of this unit is crazy, it has a number of color settings on it. I actually found this display to be very easy to see from 10 feet away, and from the side (around 150 degrees). It as well has two usb 3 slots on it and the audio connectors. If you want a really cool looking fan control that has great performance get this, but be ready for a lot of wires. It is a little intimidating at first, but if you think out wire management ahead of time you will be fine.System specs:nzxt phantom caseasus crosshair v formula z (junked gigabyte 990afx-ud7 (this is being sent back, i don't like this board at all)amd 8350 bulldozer(2) nvida gtx690 (this is were the issue is)creative labs titanium fatalityhauppauge win tv 1600 (couldn't fit this, slots get blocked quickly)(5) hp hd monitors32 gigs of corsair platinum ramcosair h100 liquid coolercosair air flow procosair airflow fan128 gig ocz series 4 ssd160 gig intel ssd3 tb seagate baracuda 7600rpmaero cool 2100 fan controlernzxt huenzxt multicard readerlg blue ray burner(2) 200 mm case fans(2) 120mm case fans(2) 140mm case fanspc power and cooling mark iii silencer 1200w power supplywindows 7 ultimatemadcatz strike 7 keyboardmadcats rat 7 mouse
By Alexandre Ennis
Waste of money!
I bought this thinking it was going to be a good part for a custom build. Unfortunately, this part does not report right temps, or fan speeds. The touch screen works great, and is an absolute pleasure to have. But right temps, and right fan speeds make it a very expensive paper weight!My fans run at 2000rpm, and this part reported them as running 1600, 1700, and 1300. All the fans were running full speed and this part reported them all running at different speeds. A big disappointment.....I'm now in the process of returning it to outletpc for a refund.
By Dunia Van Beugen
Coool fan controller
Does its job, would be nice for a lockl button, and 2 of ym case fans were 4 prong and this only accpects 3 prong connectors :-( and the adhesive tape is kinda crappy
By Abigail Johnson
It works
It works and looks okay. My biggest issue with it is that it will not allow me to turn my fans down to the speeds i prefer to have them at. It somehow figures out "the proper lowest speed" for your fan and won't let you go below that. One fan can't be set below 1400 and another won't go below 1300. I used to run them both at 1000 rpm without problem.It does allow me to run fan number 3 at 1000 rpm and fan number 4 at 800 rpm. Go figure. I do monitor my core temps and they were stable and within acceptable limits at the lower fan speeds that i used to run them at. A bit of an annoyance but otherwise it seems to be performing adequately.
By
Good buy.
Pretty good fan controller. It looks wonderful with my case. I had to sacrifice using the audio and usb features on it because i have a graphics card that is in the way of it. The colors are bright and easy to see from most angles. A couple of the downsides would be that: a) some fans are not able to go over a maximum rpm even though the fan is rated for higher than that. As well, the temperatures are not very true at all. Quite a ways off from actual temps given by speedfan or other programs like it. But, those don't really effect the usefulness of the product. I would recommend it to someone.
By Zakiya Raap
Just okay
Does the job, but not real touch lcd. It is basically just a backlit screen with some sensors, looks a little tacky, but is does help with the noise. I just shut the screen off.
By Mabel Lee
Not too shabby for 50 bucks
First off let me say that if the lcd screen was brighter and the colors more vibrant i would have given it 5 stars. My only gripe with this is some of the colors don't read very well and it's only well visible when looking down on it. But the fan speed control works well and the temperatures are extremely true! Its a neat addition to any custom rig! Highly recommended.References-i own this product-i'm a certified pc tech with over 10 years experience building custom rigs.
By
Great item
With this item you will love it it tells you very thing on whats going on in youre computer so get youres today
By Herm Dirksen
Great!
I bought this primarily for the benefit of how it looks, otherwise having two empty 5.25" bays. Quite frankly, it is beautiful, the colors are very cool, and the touch functionality is flawless. Though i only have it connected to two fans (the two fans of my corsair h100 liquid cooler), it reports the right rpm of each fan. It is not, however, able to adjust the speed of the fans, unlike when the fans are connected to the liquid cooler itself. This may be due to the fans being exclusively controlled by the cooler itself. In terms of capable management, the usb 3.0 port is a very flamboyant blue, not even remotely matching any of my red custom build's interior, enticing me to simply tuck it away.
By Consuelo Ortega
Great product, more control, more connectivity!
I love this fan controller, not only for it's responsiveness, but for it's connectivity as well! Threw this in a nzxt phantom 820, connected four fz-200 led fans, and 1 fz-140 led to it as exhaust. Now, when i'm watching a movie or something, i can turn off the side fan and one top fan to split down the noise by half, easily turn them back on when i jump back into the game.Overall, the fan controller is more than useful to any of you enthusiasts likes myself. Granted, in order to get full functionality out of it, i had to purchase a sound card to use the audio, but it was no big deal. Get better sound now that the audio is stand-alone, so i'm really not complaining about that. The included usb 3,0 was plugged into my gigabyte on/off usb 3.0 on/off charge, nice to know i can charge my phone even when the computer's off. The only thing i didn't really like about it was the fact that i paid $60 for this thing and none of the cables were sleeved. Of course, you could always do it yourself, but even nzxt sleeves their fan controller cables and their unit is half the price!Other than the unsleeved cables and the flamboyantly blue usb 3.0 cable, this is a great piece of hardware that you can use to give your system a bit more appeal. Goes great with the nzxt phantom 820 case, which has adjustable hue lighting -and since this thing comes with a color-change utility built right it, you can easily change the color to match the lighting of your hue should you go with the case.I highly recommend this product!What's included in the box:aerocool touch 2100 unit (duel slot) (powered by 4 pin molex)expansion bay mounting screws (x 8)2x replacement 3 pin fan cables (in case you snap one closing the lid on your case / - kind of like i did... (hahah))2x replacement temperature meters. (i'm assuming these vary by unit shipped. Because compared to my infrared thermometer, they were spot on, maybe 2-3 degrees off.Yes, the usb 3.0 has a usb 2.0 dangle on the side of it, ( much like those 6+2 pci cables) so don't fret if you don't have a spare usb 3.0 header on your motherboard.- it gave my fans, factory labeled for 700rpm an extra 100rpm, i don't know if this is due to the amount of power it can supply to each and every fan, but it's nice little tweak.- controls up to 5 fans, more than enough for fulfill the needs for your system.- the brushed aluminum finish adds a nice touch to any system, goes best with black or gray chassis.Overall, i highly recommend this product for those who wish to have more connectivity in their system, and more control over their airflow.

Q&A

Question & Answers

Ask A Question
EN51965

AeroCool Touch 2100 LCD Fan Controller with USB3.0 Audio/Mic

Price: $55.88
FREE Shipping!