Product Description Specifications Customer Reviews
Home  >  Fans (Cooling)  >  Water Cooling  >  Reservoirs  > 
Alphacool Eisbecher D5 Reservoir

Alphacool Eisbecher D5 150mm Plexi Reservoir

Alphacool Eisbecher D5 150mm Plexi Reservoir
Out Of Stock
Was: $104.20 You save 25% today!
Sale Price: $78.15

General Features:

  • Measurements incl. mounting without base (LxWxD): 176 x 136 x 79,5mm
  • Measurements without mounting incl. base (LxWxD): 223,5 x 87,5 x 80mm
  • Diameter of the Plexitube: 60mm

Package Includes

  • 4x M4x25mm screw
  • 8x M4x8mm screw
  • 4x M4 nut
  • 1x mounting ring
  • 1x O-Ring ID ca. 54mm
  • 2x base
  • 1x allen key 2.5mm

Item#: OE4195
Brand: Aquatuning
MPN: 1011329
Compatibility: G1/4
Packaging: Retail
Availability: Out of Stock

Condition: New




Reinvent the tube. The Eisbecher Series consist of 20 different reservoirs that differ between usage, measurement and appearance. There are ten reservoirs within this series that consist of 99% plexi - totally unique! But the main difference between these reservoirs is within the functionality of the different sockets. Constituents Bubble Down It is placed at the bottom of the reservoir to prevent turbulences that could lead air into the watercircle. Lighttower Standpipe The "Lighttower" effect creates an astounding visual experience within every watercooling system. The Eisbecher supports this in two different ways: fluid coming from the bottom and coming from the top. The water is being led through the standpipe to the bottom or to the top where it splashes out of eight evenly distributed holes at the end of the pipe to the inner wall of the reservoir. This special watergame is the so called "Lighttower" effect. Stand The known feet from the "Eisdecken" find its very way even to the Eisbecher and sustain every combination with a solid stand. Mountings There are two mountings placed above and under the pipe for fastening the lot in the casing. The holes in this mounting have a spacing of a 120/140 cooling fan.You can reduce the width of the mountings up to the width of the reservoir and there are three M4 threads availaible per mounting for fastening if you would rather not mount the reservoir at the fan space. These mountings are easily removeable especially when not being used. You will find these mountings on all 20 reservoirs. Lighting module The lighting modules consist of plexi and enable the lighting with a 5mm LED. These modules can be installed into all 1/4" holes. They are being used in the lid and occasionally in the socket of the reservoir. This facilitates a unique way to your personalised lighting effects. Material All models of the reservoir are availaible in acetal and plexi. So there is something for everone. Measurements All reservoirs are availaible in two different sizes: the 150mm version and the 10cm bigger 250mm version. The smaller reservoir comes with only one standpipe coming from the bottom because of its size and the bigger reservoir comes with two: one coming from the top and the other one from the bottom. The Eisbecher D5 This Eisbecher is the older brother of the DDC version. The pump is being mounted with a mounting ring that holds the pump with eight screws. You can use four LEDs that are hidden within the socke of the pump for the lighting of the plexi version. The lighting of the top is fascilitated through the lighting module. Standpipe and Bubble Down both do an excellent job in this model as well. The fastening happens through either the mountings or through the bases that are included in the delivery. There are even threads in the socket of the pump should there be a free space at the 3,5" drive bay (pump decoupling with M4 inner thread and outer thread needed - Art. 52007).




You May Also Like
XSPC Photon 270 Tube Reservoir
Regular Price: $77.99
Sale: $67.30
Qty: