Free Shipping

MonoPrice 5401 2-way Adustable 30 Inch Single Monitor Desk Mount

MPN: 5401 | SKU: PO2336
Regular Price: $36.45
Price: $26.98
In Stock. FREE Shipping!
  • Fits monitors with VESA 50x50, 75x75, and 100x100 mounting patterns
  • Tilts +/- 12 degrees
  • Steel construction with welded base clamp and aluminum extension arm
  • Height adjustable from about 8.75" ~ 15"
  • Clamps to surfaces between 0.87" ~ 2.25" thick
  • Supports up to 33 lbs.
$36.45
$26.98
You save 26% today!
In Stock. FREE Shipping!
Upgrade Your Warranty:

Frequently Bought With

  • Key Selling Points

Key Selling Points

  • Fits monitors with VESA 50x50, 75x75, and 100x100 mounting patterns
  • Tilts +/- 12 degrees
  • Steel construction with welded base clamp and aluminum extension arm
  • Height adjustable from about 8.75" ~ 15"
  • Clamps to surfaces between 0.87" ~ 2.25" thick
  • Supports up to 33 lbs.
  • Description
  • Product Details
  • Customer Reviews
  • Q&A

Description

Monoprice Swiveling Single Monitor Mount - This tilting and swiveling monitor desk clamp from Monoprice saves you desk space by lifting your monitor to the skies.Free space on your desk and gain improved ergonomics by using this 2-Way Adjustable Tilting Monitor Desk Mount Bracket from Monoprice! Using a desk mount bracket provides additional desk space by moving the monitor above the desk. The bracket allows you to position your monitor at eye level, which reduces neck and back strain and aches from length sessions in front of the computer. The mount attaches to the edge of a desk, table, or other horizontal surface with a thickness between 0.87" ~ 2.25". The mount has a 5.5" extension arm that can be swiveled from side to side. The monitor can be tilted up to +/- 12 degrees. It fits monitors up to 33 lbs. weight with either 50x50, 75x75, or 100x100 VESA mounting pattern. Features: Fits monitors with VESA 50x50, 75x75, and 100x100 mounting patterns Tilts +/- 12 degrees Steel construction with welded base clamp and aluminum extension arm Height adjustable from about 8.75" ~ 15" Clamps to surfaces between 0.87" ~ 2.25" thick

  • Fits VESA 75mm and 100mm Mounting Patterns
  • Tilts 12 degrees, 360 degree Swivel
  • Desk Clamping Mount

Monoprice 5401

Model #
LCD-501 BLACK
Minimum VESA
50 x 50
Maximum VESA
100 x 100
Maximum Weight
33 lbs
Minimum Req. Display Size
13"
Maximum Req. Display Size
30"
Minimum Extension
0.78"
Maximum Extention
5.5"
Tilt Range
12 degree
Swivel Range
360 degree
Construction
Steel & Aluminum
Color
Black
  • 2 way adjustable tilting
  • Fits displays 13" to 30" maximum weight 33 lbs
  • VESA 50x50, 75x75, and 100x100 mounting patterns
  • Lifetime Monoprice Warranty
  • Tilts ?12 degrees. Steel construction with

PACKAGE INCLUDES:

  • Monoprice 2-Way Tilting Desk LCD Mount
  • Mounting Hardware
  • Instructions


Brand: MonoPrice

MPN: 5401

UPC: 844660054016

Compatibility: VESA 50mm / 75mm / 100mm

Packaging: Retail

Condition: New



Product Details

Manufacturer
Monoprice
MPN
105401
Name
2-Way Adjustable Tilting Desk Mount Bracket for 13~30in Monitors, Black
Mount Style
Clamp Mount
Characteristics
2 way adjustable tilting
Height
6.000
Width
10.000
Weight
4.38
Electrical Outlet Plug Type
TV Wall Mounts

Package Includes

Customer Reviews

Review Summary
4.0
Reviews
5
37.5% (9)
4
29.17% (7)
3
12.5% (3)
2
16.67% (4)
1
4.17% (1)
By Elouan Faure
Worth the price
I have purchased three of these mounts so far, and they work well.It has a very limited tilt so more tilting would definitely be a plus.I use it on a 10.4" touch panel made by advantech.
By
Works as advertised
Works as advertised. Is very stable. Helps keep the desk organized and easy clean. Would have liked a pad of something to protect the surface of the desk were the clamp goes (used a piece of cardboard).
By
Foot connection needs a bit better way to adjust
This is a pretty nice desk mount bracket, but the foot has a limited range for fastening to a desk or table top. The foot in in two parts, i had to remove the screws and expand the foot to have it attach to my computer desk. No loss of strength issues by doing this, just not sure it was designed to make this type of adjustments. Instructions are very basic, nothing about adjusting the foot or if that would make weak point for the device. I use it to support a lg flatron e241 22" monitor that wiggled to much on the stand that came with it. This make a very sturdy base that tilts up and down and side to side. Enjoying typing and not seeing the screen jump around. This was a good buy and works well for me.
By Necati Avan
Good mount
My desk is apparently too thin for this mount. Even when screwed down all the way it still does not grip my desk. I used a small block of wood to fill the gap and it works just fine. It feels solid and frees up desk space.The only other minor complaint that i have is that the small t-bar that's used to tighten it seems a little small, and somewhat difficult to torque down. But it's not too bad really.If i had it to do again, even knowing these limitations, i would still buy this, it's a very good bargain for the money, and serves it's purpose well.Update: purchased a second monitor, and a second mount. Still loving it.
By Aurora Sanz
Good value
This doesn't articulate as far as some, since it only has a single arm. It is solid and works for what i wanted - at the best delivered price around.
By Otto Wiitala
Recommended for light use
I bought 2 of these for dual monitors. Easy to set up and reasonable to adjust; they feel a bit flimsy but i don't expect to be moving them now that they are set up. I recommend them.
By
Blah
I bought this to mount a monitor for my photography. I do a lot of on site/ event stuff and i utilize the monitor to allow the clients to have a live view of what i'm doing. I wouldn't really recommend this because the little clamp at the bottom sort of limits where you can put this.
By Emil Mohr
Cheap but works
This being my first time buying a lcd desk mount. I don't know what to expect. It is easy to install. I had an issue where my desk is too thin for it. I needed to use a block of plastic in order for the desk clipper to secure to the desk. Apart from that, it works as advertised. It is good enough that i might just buy this item again in the future when i need more mounts.
By
Absolutely horrible
I really wanted a desk mount monitor stand to clear up some desk space that i desperately needed. This desk mount failed entirely. I tried several different monitors with this mount, and they all resulted in the monitor hanging bent. Each monitor was less than the 33 lb max weight with one being around 10 lbs. And still was too heavy for this stand. It was really disappointing considering that this stand was cheap, looked great, and seemed to be made out of solid materials. All of that doesn't matter if it can't get the job done though. Its safe to say i won't be buying any more monoprice products in the near future.
By
Desk mount?
You will need a block to mount it on newer style glass top desk's or tv stands as it does not clamp to thin surfaces

Q&A

Question & Answers

Ask A Question
5401

MonoPrice 5401 2-way Adustable 30 Inch Single Monitor Desk

Price: $26.98
FREE Shipping!