Disappointed by the metal clips
The heatsink pieces are of nice quality, as is the thermal material, but i was disappointed by the metal clips. They are made of very thin metal with sharp edges. If you're not very careful, you will easily scratch the black finish off of the heatsink when you apply them. Any attempts to bend the metal will probably break them. I first tried this with a double-sided nvme card to see if it would still work; the extra thickness was too much for the metal clips to attach fully on each side. I would think it would be a simple matter to provide two clip sizes to support all nvme cards, even if there may be clearance issues on some motherboards.