Good, but needs spacer for thin ssds
Comes with all hardware, except it could use a lanyard for attaching key to rear of enclosure (for those not worried about security, but more concerned about losing key). Biggest problem... It needs a spacer for thin ssds. Apparently, ssds are not as thick as mechanical 2.5" drives, so when first installed ssd and started machine, i thought i wired wrong, but it turned out it was ssd did not seat properly when latch closed (i tried several times, carefully). I resolved problem by opening pc case and using one hand to hold ssd flat against "perforated" mount surface while other hand closed mount latch. That solved problem, ssd seated properly, but defeats purpose because you have to open pc case to properly seat ssd drive. I don't plan on removing ssd, so not a big deal, but an oversight on an overall well designed and product package. Syba should include a 7 mm to 9.5 mm adapter/spacer to slide in with ssd to hold it in place against "perforated" surface. Note: can't find a 7 mm to 9.5 mm adapter/spacer on-line (crucial appears to include with some ssds), so i'll make a 2.5 mm (3/32") thick plastic insert. Quick use alternative: use scissors to trim foam piece that came with product to ssd rectangular dimension, then split out inner rectangular section of foam spacer to allow for ssd's surface heat dissipation.